When it comes to budget 3D printers, the Creality Ender 3 is a popular choice among the 3D printing community. This printer, released in 2018, is known for its versatility and print quality. With the large community following behind the Ender 3, there have been many upgrades and modification options to enhance the printer’s abilities and performance. Creality also released additional versions of the Ender 3 including the Pro, V2, and S1. Each version offers slightly different features, but all are capable of fine-tuning when it comes to print settings.
Print speed is a key factor when it comes to getting the most out of your Ender 3, and it’s essential to understand the different settings that affect it. In this article, we will focus on the speed settings for the Ender 3 and its different versions.
The main setting you should change when adjusting print speed is the “Print Speed” setting, which can be found in most 3D slicers. This setting controls the values of other speed settings, such as infill speed and wall speed. The typical print speed for a stock Ender 3 printing PLA is between 45 and 65 mm/s. However, results will vary depending on the filament material and nozzle size. For ABS filament, a print speed of 60 mm/s is recommended, while materials such as PETG and TPU work better with slower speeds.
Another important setting to consider is the infill speed, which tells the printer how fast to print the infill structure of the model. Most slicers have the infill speed set to the same value as the main print speed setting. However, you can adjust this setting in increments of 5 mm/s depending on the print quality and print time of your models.
Wall speed is another setting that affects print speed. This setting controls how fast the printer is extruding and applying filament for the walls of the model. A suggested value for wall speed on the Ender 3 is between 30-40 mm/s.
In summary, adjusting print speed settings on the Ender 3 is critical to achieving the best prints. The main setting to change is the “Print Speed” setting, and it’s essential to consider other settings such as infill speed and wall speed. It’s recommended to adjust these settings in increments of 5 mm/s or less, based on the quality of your current prints.